NFC Uhf Rfid Temperature Sensor Sticker Tag with temperature measurement function. It has three interfaces, contact interface and non-contact interface. The contact interface adopts I2C protocol interface, and the non-contact interface supports two RF interfaces, high frequency and ultra high frequency. Uhf interfaces support THE ISO18000-6C (EPCC1G2) protocol. The label is equipped with a high-precision temperature sensor to measure the ambient temperature in real time or at a scheduled time. The chip has a large capacity EEPROM, which can be used to store temperature data for a long time. The stored data can be read through the HIGH frequency, ultra high frequency or I2C interface. The high frequency interface supports the reading of data on Android phones and iPhone phones.
Active with thin Paper Battery Support | |
RFID Standard
|
NFC: ISO/IEC 14443 Type A
UHF:ISO/IEC 18000 – 6 |
APP
|
Android version 4.2 or above
IOS version 13.0 or above |
Size
|
Length:85.6mm Width:54mm thickness:0.8mm
|
Weight
|
1.82g/pc
|
Voltage
|
1.5V
|
Battery capacity
|
5mAh
|
Material
|
PET
|
IP grade
|
IP67
|
Service life
|
2 years (measured at 15-minute intervals in continuous test mode)
|
Temperature Range
|
-30℃ to +65℃
|
Temperature accuracy
|
±0.1℃ (0℃to +45℃ range)
±0.5℃ (-30℃ to +65℃ range) |
Measurement interval
|
Min 1second,max86400second(24hours)
|
Time accuracy
|
±2%(-30℃ to +65℃range)
|
ISO15693 Interface communication rate:
|
26K bps
|
ISO14443 Interface communication rate:
|
106K bps
|
Data record repository
|
At least 20000 temperature and time data stored in non-volatile
storage, even when the battery is exhausted, temperature and time data is normally preserved |
Data recording mode
|
“Full record” mode: Record all measured data (time and temperature)
|
Data upload
|
Supports FTP service parameter setting and data uploading
|
Data format
|
Standard CSV、PDF format
|
Language
|
Chinese/English
|